Smart Product Number: GF4A
Cladding Mode Offset Photosensitive Single-Mode Fiber
Nufern's Cladding Mode Offset Fibers offer enhanced performance when writing two or more gratings adjacent to each other (circa 9 nm offset). Cladding Mode Offset fibers exhibit low splice loss to the industry-standard telecommunications fiber. This photosensitive fiber provides a cost-savings for grating-writing because customers can write highly repeatable, quality gratings in a short time.
Geometrical & Mechanical Specifications
Coating Requirements: UV Cured, Dual Acrylate
Features & Benefits
- High photosensitivity - shorter grating writing time
- High cladding mode offset ~ 9nm - allows for tighter channel spacing
- Tight mechanical and optical tolerances - high component manufacturing yields
- C+L Band Gratings
Nufern’s optical fiber products, including rare-earth doped, gyro, polarization-maintaining, radiation resistant, photosensitive, multimode and single mode, and any other optical fiber product including custom optical fibers, may be covered by one or more of the following pending or issued U.S. Patents, each of which is owned by or licensed by Nufern:
6,779,364; 6,832,026; 6,904,214; 6,950,586; 7,003,206; 7,050,686; 7,062,137; 7,110,647; 7,116,887; 7,167,621; 7,317,857; 7,371,019; 7,386,210; 7,400,812; 7,483,610; 7,634,164; 7,724,422; 5,949,941 (licensed from Furukawa Electric Co. of North America).
Moreover, use of Nufern’s optical fiber products, including modifications thereof, combinations with other products, or certain specific uses can necessitate additional customer licensing, particularly with respect to U.S. Patent nos. 5,818,630 (IMRA America, Inc.) and 6,496,301 (The United States of America as represented by the Secretary of the Navy). See the terms and conditions specific to your purchase.